Shake or blow on the jewelry piece to remove excess liquid then gently polish with a soft lint free cloth or chamois. Thus this will create the required shape and will enable a slower cutting process. The angle is then changed to the angle of the main crown facets. Here s a jeweler s trick to avoid any liquid stains on a gem or precious metal setting. Repeat step 3 to create several facets and form a rough shape for your gemstone.
The dop with the garnet is placed back into the machine and tightened down. Place the gemstone on the diamond cutting lap once the gemstone has completely bonded with the dop stick and wax. Polish the top of the cut gem against the polishing lap. Pour a small amount of water onto the centre of the sandpaper. Just take the graphite pencil lead out of all the pencils in the drawer turn the heat and pressure up to the highest setting and we can make a diamond.
First either find a line on the surface or mark the stone where it needs cutting. Feed it gently and watch the saw blade constantly. Now change the lap from 260 grip lap to 600 grit lap. Dispense with the cloth and immerse the jewelry piece in a bed of dry maple wood chips. The next step of the cutting process is to cut in the main crown facets.
RELATED ARTICLE :
Then pull the stone away from the wax. Now the main trick is to keep your eye in line with the blade. This will buff your new gemstone until it sparkles and will help remove any grit or imperfections leftover by the faceting process. Aug 8 2016 this is a quick video tutorial on how to cut and polish a low hardness gemstone in this case fluorite using materials that you can find around the home an. Hold the marked line on the stone straight to the blade.To remove the finished stone from the dop stick warm the wax near an open flame so it softens. The 45 degree adaptor dop is removed. To remove the finished stone from the dop stick warm the wax near an open flame so it softens. Then pull the stone away from the wax. First either find a line on the surface or mark the stone where it needs cutting.
The 45 degree adaptor dop is removed. The dop with the garnet is placed back into the machine and tightened down. Shake or blow on the jewelry piece to remove excess liquid then gently polish with a soft lint free cloth or chamois.
